Scottoiler Slipperblock

The Slipperblock (Patent pending) is the next generation method for lubricant application. In its' first incarnation the silicone rubber block ‘floats’ on the chain from a mounting point on the swingarm. The Slipperblock can be positioned away from the sprocket/chain interface to make it less vulnerable.

The Slipperblock’s main benefit is that it also cleans the chain while lubricating it when it passes through the block. By removing abrasives from the chain as it enters the block it leaves a clear path for the oil to be fed directly to the inner side plates of the chain. This means the oil can spread easily to the most important places for chain lubrication – the pins (to prevent wear of the case hardening and ultimately chain stretch), the rollers (to protect against metal on metal contact from the sprocket and reduce hooking of the teeth), the o/x-rings (to reduce the friction of the rings against the metal surfaces, increasing chain efficiency, reducing the operating temperatures and improving power transfer).

The Slipperblock ‘floats’ on the layer of oil it puts on the chain, but is ultimately a wearing part. The very small drag effect the block has on the chain helps keep the lubricant at its optimum temperature to provide a suitable cleaning and lubricating action whilst also reducing fling from the sprockets as the block operates as the ideal shedding point for any built up dirt.

NB. Slipperblocks are supplied in two sizes; for 520 size and 525/530 chains, refer to the sticker on the front of the box for sizing.

Slipperblock Evolution

The Scottoiler Slipperblock is now entering its second stage of evolution following comprehensive customer feedback on the Mark 1 system. The Slipperblock (which is now sold out at manufacturer level) has come to the end of its initial production run and is undergoing developmental changes prior to a re-launch next season. The next generation Slipperblock will incorporate a more durable, low friction material and a more efficient and stylish shape.

During the re-tooling process Scottoiler will continue to offer full technical support, advice and spare parts to Mark 1 Slipperblock owners so please contact us direct if we can be of any help.

Download fitting instructions for the Mark 1 Slipperblock system - pictured (116kb)

For further information please contact Nick Muddle at Scottoiler on +44 (0)141 955 1100 or email nick@scottoiler.com.

For technical support please contact Scottoiler on +44 (0)141 955 1100 or email technical@scottoiler.com.